Kia Sorento: IPM Specifications - BCM (Body Control Module) - Body Electrical System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: IPM Specifications

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / BCM (Body Control Module) / IPM Specifications

Items
Specifications
Rated voltage
DC 12V
Operating voltage
DC 9 ~ 16V
Operating temperature
-30°C ~ 75°C (-4°F ~ 158°F)
Insulation resistance
RKE specificaiton : 5.5 mA
Smart key specificaiton : 3.0 mA
LIN communication specificaiton : 3.3 mA

※ Abbreviation
IPM : Intelligent intergrated Platform Module
DDM : Driver Door Module
ADM : Assist Door Module
IMS : Intergrated Memory System
SMK : Smart Key
BCM (Body Control Module)
...

IPM Components
Outer Connector (L / M / N / K) Connector Pin No. Description Active Remark K 1 IMS LIN     ...

See also:

Seat Belt Buckle Switch (BS) Description
The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status input. The se ...

Parking Brake Assembly Removal
Parking Brake Shoe 1. Raise the vehicle, and make sure it is securely supported. 2. Remove the rear tire and wheel. 3. ...

Automatic transaxle (If equipped)
Automatic transaxle operation The automatic transaxle has 6 forward speeds and one reverse speed. The individual speeds are selected automatically, depending on the position of the shift lever. & ...

Copyright © www.ksmanual.com 2014-2024