1. |
Disconnect the battery negative terminal.
|
2. |
Remove the air cleaner assembly.
(Refer to Intake And Exhaust System - "Air Cleaner")
|
3. |
Disconnect the intake OCV (Oil control valve) connector (A).
|
4. |
Disconnect the VIS (Variable intake system) connector (A), the OPS (Oil
pressure switch) connector (B), the injector extension connector (C),
the knock sensor connector (D), the alternator connector (E) and the
air compressor connector (F).
|
5. |
Disconnect the ETC (Electronic throttle control) connector (A) and MAPS
(Manifold absolute pressure sensor) & IATS (Intake air temperature sensor)
connector (B).
|
6. |
Disconnect the PCV (Positive crankcase ventilation) hose (A).
|
7. |
Disconnect the vacuum hose (A) and PCSV (Purge control solenoid valve)
hose (B).
|
8. |
Disconnect the throttle body coolant hoses (A).
|
9. |
Remove the oil level gauge (A).
|
10. |
Remove the intake manifold stay (A).
|
11. |
Remove the intake manifold (A) with the gasket (B).
When installing the intake manifold, tighten the bolts and nuts with
pre-torque first, and then tighten the bolts and nuts with specified
torque in the sequence shown.
|
12. |
Install in the reverse order of removal.
|
Emission control system
The emission control system of your vehicle is covered by a written limited warranty.
Please see the warranty information contained in the Warranty & Maintenance booklet
in your vehicle.
Your v ...
Front Wheel Speed Sensor Removal
1.
Remove the front wheel and tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
...
Rear Shock Absorber Removel
2WD
1.
Remove the rear wheel and tire (A) from rear hub .
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 ...