1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the cowl side trim.
(Refer to Body - "Crash Pad")
|
3. |
Using a screwdriver or remover, remove the crash pad side cover
(A).
|
4. |
Disconnect the stopper (B) from the glove box (A).
|
5. |
Disconnect the air damper (A) from the glove box (B).
|
6. |
Disconnect the pins (A) and then remove the glove box (B).
|
7. |
After loosening the mounting screws, then remove the crash pad
side garnish [RH] (A).
|
8. |
After loosening the mounting screws, then remove the crash pad
under cover (A).
|
9. |
After loosening the mounting screws, then remove the glove box
housing (A).
|
10. |
Disconnect the glove box lamp connector (A).
|
11. |
Disconnect the connector (A) and then remove the intake actuator
(B) after loosening the mounting screws.
|
12. |
Install in the reverse order of removal.
|
Power Tailgate Unit Circuit Diagram
...
Lane Departure Warning System (LDWS) Unit Installation
1.
Install the LDWS unit.
2.
Install the LDWS unit cover.
3.
Check LDWS system operation.
...
Battery Description
1.
The MF(Maintenance Free) battery is, as the name implies, totally
maintenance free and has no removable battery cell caps.
2.
The MF(Mai ...