Kia Sorento: Installation
•
|
Install the component with the specified torques.
|
•
|
Note that internal damage may occur when the component
is dropped. If the component has been dropped, inspect before
installing.
|
|
•
|
Use care to keep foreign material out of the valve.
|
|
1. |
Install in the reverse order of removal.
|
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the variable intake solenoid valve connector ( ...
Fuel Pressure Control Valve is installed on the high pressure fuel pump
and controls fuel flow flowing into the injectors in accordance with the ECM
signal calculated based on various engine ...
See also:
Power tailgate (if equipped)
(1) Power tailgate open/close button
(2) Power tailgate off button
(3) Power tailgate handle switch
(4) Power tailgate close button
✽ NOTICE
The power tailgate operates when:
Automat ...
Shift Cable Removal
1.
Remove the floor console.
(Refer to Body - "Floor console")
2.
Remove the air duct.
3.
Dis ...
Using a child restraint system
For small children and babies, the use of a child seat or infant seat is required.
The child seat or infant seat should be of appropriate size for the child and should
be installed in accordance w ...