1. |
Check IPM input/output specification of multifunction switch using
the GDS. If the specification is abnormal, replace the lamp or wiper
switch.
|
2. |
If diagnosis is required on the multifunction switch, select model
and "IPM".
|
3. |
Select "Current data" and check the input/output condition of
"Multifunction switch".
|
4. |
To perform test on "Multifunction switch" outputs, select "Actuation
test".
|
Oil Cooler Removal
1.
Loosen the drain plug, and drain the coolant. Remove the radiator cap
to help drain the coolant faster.
2.
Disconnect the oil cooler coo ...
Injector
The GDI injector is similar to a standard injector, but sprays fuel at
a much higher pressure directly into the combustion chamber and has a swirl
disc to get the fuel swirling as it exits th ...
High Pressure Fuel Pump Installation
•
Be sure to check the low pressure fuel hose quick-connector
(A) is completely connec ...