|
1. |
Disconnect the Inhibitor swtich connector.
|
2. |
Ignition KEY "ON"" & Engine "OFF".
|
3. |
Measure voltge between supplied power and ground at inhibitor
circuit.
|
1. |
Connect the Inhibitor switch connector.
|
2. |
Ignition KEY "ON" & Engine "OFF".
|
3. |
Measure voltages between each terminal and chassis ground during
shift lever changed "P, R, N, D".
Signal Code Table
|
Component Location (1)
1. Smart key unit
2. Interior antenna 3
3. Interior antenna 2
4. Interior antenna 1
5. Buzzer
...
Illuminated ignition switch (if equipped)
Whenever a front door is opened, the ignition switch will illuminate for your
convenience, provided the ignition switch is not in the ON position. The light will
go off immediately when the igniti ...
Maintenance under severe usage conditions
The following items must be serviced more frequently on cars normally used under
severe driving conditions. Refer to the chart below for the appropriate maintenance
intervals.
R : Replace
I : Ins ...