1. |
Turn ignition switch OFF.
|
2. |
Remove the air duct.
(Refer to Engine Mechanical System - "Air cleaner")
|
3. |
Disconnect the solenoid valve connector (A).
|
4. |
Measure resistance between sensor signal terminal and sensor ground
terminal.
|
5. |
Check that the resistance is within the specification.
|
Fuel Filler Door Release Actuator Inspection
1.
Remove the fuel filler cover (A) after loosening screws (2EA).
2.
Remove the fuel filler door module (A).
...
Power Window Switch Components
Power Window Main Switch
Passenger Power Window Switch
Rear Power Window Switch
...
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Remove the rear seat.
(Refer to Body - "Rear ...