1. |
Turn the ignition switch OFF.
|
2. |
Disconnect the injector connector.
|
3. |
Measure resistance between the injector terminals 1 and 2.
|
4. |
Check that the resistance is within the specification.
|
AVN Head Unit Installation
1.
Connect the AVN head unit connectors and cable.
2.
Install the AVN head unit.
3.
Install the center air vent ...
Relay Box (Passenger Compartment) Inspection
Fuse
1.
Be sure there is no play in the fuse holders, and that the fuses
are held securely.
2.
Are the fuse capacities for each circuit ...
Teaching Procedures
1.
Key Teaching Procedure
Key teaching must be done after replacing a defective PCM(ECM)
or when providing additional keys to the vehicle owner.
The procedu ...