1. |
Turn the ignition switch OFF.
|
2. |
Disconnect the HO2S connector.
|
3. |
Measure resistance between the HO2S terminals 4 and 5 [B1/S1].
|
4. |
Measure resistance between the HO2S terminals 3 and 4 [B1/S2].
|
5. |
Check that the resistance is within the specification.
|
Component Location
1. Rear wiper arm & blade
2. Tailgate glass hole
3. Grommet
4. Rear wiper arm nut
5. Rear wiper motor assembly
6. Head cap
7. Rear wiper motor bolt
...
Cylinder Head Disassembly
Identify MLA(Mechanical Lash Adjuster), valves, valve springs as they
are removed so that each item can be reinstalled i ...