1. |
Turn the ignition switch OFF.
|
2. |
Remove the ECTS (Refer to "Removal").
|
3. |
After immersing the thermistor of the sensor into engine coolant,
measure resistance between the ECTS terminals 3 and 4.
|
4. |
Check that the resistance is within the specification.
|
Spark Plug Description
A spark plug is a device for delivering electric current from an ignition
system to the combustion chamber of a spark-ignition engine to ignite the compressed
fuel/air mixture therein by mean ...
Parking Assist Sensor Component
...
Pressure Sensor Installation
•
Check the cleanliness of the pressure sensor before installation.
...