1. |
Turn the ignition switch OFF.
|
2. |
Disconnect the IATS connector.
|
3. |
Measure resistance between the IATS terminals 3 and 4.
|
4. |
Check that the resistance is within the specification.
|
EBD (Electronic Brake-force Distribution)
The EBD system (Electronic Brake force Distribution) as a sub-system of
the ABS system is to control the maximum braking effectiveness by the rear wheels.
It further utilizes the efficiency ...
Input Speed Sensor Inspection
1.
Check signal waveform of Input & output speed sensor using the
GDS.
Specification :
Refer to "Signal Wave Form" section.
...
Trunk Trim Replacement
Luggage Side Trim Replacement [7 seats]
•
Put on gloves to protect your hands.
...