Kia Sorento: Inspection
Check it by the procedure below to see if the function of the ECM is normal.
| 1. |
Turn the ignition key to the "ON" position.
|
| 2. |
Cover the forward facing sensor.
|
| 3. |
Head a light to the rearward looking sensor.
|
| 4. |
The ECM should be darkened as soon as the rearward looking sensor
detects the light.
|
| 5. |
When the reverse gear is engaged, the ECM should not be darkened.
When heading lights to both the forward facing and rearward looking
sensors, the ECM should not be darkened.
|
Automatic-dimming Function
To protect your vision during nighttime driving, your mirror will automatically
dim upon detecting glare from the vehicles traveling behind you. The auto-dimming
function can be controlled by ...
Removal
1.
Remove the mirror wiring cover (A).
2.
Remove the mirror mounting screw (A) and connector (B).
3.
...
See also:
Components
1. Steering column shaft
2. ECU
3. Motor
4. Steering gear box
...
Inspection
1.
Disconnect the ignition switch connector (B) and key warning switch
connector (A) from under the steering column.
2.
Che ...
BJ Boot Components
1. BJ assembly
2. BJ circlip
3. BJ boot band
4. BJ boot
5. Dynamic damper band
6. Dynamic damper
7. Shaft
8. TJ boot band
9. TJ boot
10. Spider assembly
...
Copyright В© www.ksmanual.com 2014-2024