Kia Sorento: Inspection
Test the horn by connecting battery voltage to the 1 terminal and ground
the 2 terminal.
The horn should make a sound. If the horn fails to make a sound, replace
it.
Horn Relay Inspection
| 1. |
Remove the horn relay (A) from the engine room relay box.
|
| 2. |
There should be continuity between the No.30 and No.87 terminals
when power and ground are connected to the No.85 and No.86 terminals.
|
| 3. |
There should be no continuity between the No.30 and No.87 terminals
when power is disconnected.
|
Installation
1.
Install the horns after connecting the horn connectors.
2.
Install the head lamp.
(Refer to "Lighting system")
...
Adjustment
1.
Operate the horn, and adjust the tone to a suitable level by turning
the adjusting screw.
...
See also:
Specifications
Items
Specifications
Rated voltage
DC 12V
Operating temperature range
-22 ~ +176°F (-30°C ~ +80°C)
Rated load
Dimmer & ...
Windshield Deicer Switch Installation
1.
Install the heater control unit.
2.
Install the center fascia panel.
...
Parking Brake Assembly Removal
Parking Brake Shoe
1.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the rear tire and wheel.
3.
...
Copyright © www.ksmanual.com 2014-2024