Kia Sorento: Inspection
Lighting Switch Inspection
| 1. |
With the multi function switch in each position, make sure that
continuity exists between the terminals below.
If continuity is not as specified, replace the multi-function
switch
Lighting switch (Auto light)
Lighting Switch
Dimmer And Passing Switch
Turn Signal Switch
Front Fog Lamp
|
Wiper And Washer Switch Inspection
| 1. |
With the multi function switch in each position, make sure that
continuity exists between the terminals below.
If continuity is not as specified, replace the multi-function
switch.
Wiper Switch
Washer Switch
Rear Wiper Switch
Rear Washer Switch
|
Installation
1.
Install the multifunction switch.
2.
Install the clock spring and steering wheel.
3.
Install the steering co ...
Inspection (With GDS)
1.
Check IPM input/output specification of multifunction switch using
the GDS. If the specification is abnormal, replace the lamp or wiper
switch.
...
See also:
Front Wiper Motor Inspection
Speed Operation Check
1.
Remove the connector (A) from the wiper motor.
2.
Attach the positive (+) lead from the battery to terminal ...
Roof Trim Replacement
Sunvisor Replacement
1.
Remove the sunvisor cover (A).
2.
After loosening the mounting screws, then remove the sunvisor
(B) and retaine ...
Outside thermometer
The current outside temperature is displayed in 1°F (1°C) increments. The temperature
range is between - 40°F ~ 140°F (-40°C ~ 60°C).
The outside temperature on the display may not change im ...
Copyright © www.ksmanual.com 2014-2024