Kia Sorento: Input Speed Sensor Removal
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Input Speed Sensor Removal
| 1. |
Remove the valve body assembly.
(Refer to Hydraulic System - "Valve Body")
|
| 2. |
Disconnect the input & output speed sensor connector (A).
|
| 3. |
Remove the input & output speed sensor (B) after removing the
bolts (2ea).
|
Input Speed Sensor Inspection
1.
Check signal waveform of Input & output speed sensor using the
GDS.
Specification :
Refer to "Signal Wave Form" section.
...
Input Speed Sensor Installation
1.
Install in the reverse order of removal.
•
...
See also:
Components
...
Operation
Power Tailgate Opening
** - Primary switch signal received by PTGM via CAN bus (sent by IPM)
PTGM Opening procedure:
1.
Opening can be triggered after a signal i ...
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the FTPS.
Specification:
...
Copyright В© www.ksmanual.com 2014-2024