Kia Sorento: IMS Control Switch Installation
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / IMS (Integrated Memory) / IMS Control Switch Installation
Make sure that the IMS control switch connectors and related connectors
are plugged in properly.
Check the IMS control switch operates normally.
|
| 1. |
Connect the connectors and reassemble the IMS control switch.
|
| 2. |
Reassemble the front door trim.
|
IMS Control Switch Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim.
(Refer to Body - "Front Door")
...
IMS Control Switch Inspection
1.
Disconnect the IMS control switch connector.
2.
With the power IMS control switch in each position, make sure
that continuity ex ...
See also:
SS-A Solenoid Valve(ON/OFF)
SS-A solenoid valve is attached to the valve body and is an on/off solenoid
valve that is used to change gears.
SS-A Solenoid valve(ON/OFF) is installed at valve body.
...
Thermostat Inspection
1.
Immerse the thermostat in water and gradually heat the water.
2.
Check the valve opening temperature.
Valv ...
Parking Brake Lever Assembly Removal
The parking brake cables must not be bent or distorted. This will
lead to stiff operation and premature failure.
...
Copyright В© www.ksmanual.com 2014-2024