Kia Sorento: Idler Removal and Installation
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Engine Mechanical System / Timing System / Idler Removal and Installation
| 1. |
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
|
| 2. |
Remove the idler(A).
|
| 3. |
Install in the reverse order of removal.
|
Drive Belt Inspection
1.
Visually check the belt for excessive wear, frayed cords etc.
If any defect has been found, replace the drive belt.
...
Drive Belt Tensioner Removal and Installation
1.
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
2.
Remove the drive belt auto tensioner(A).
...
See also:
Cruise Control Switch Inspection
Measuring Resistance
1.
Disconnect the cruise control switch connector from the control
switch.
2.
Measure resistance between t ...
Seat Belt Pretensioner (BPT) Description
The Seat Belt Pretensioners (BPT) are installed inside Center Pillar (LH
& RH). When a vehicle crashes with a certain degree of frontal impact, the pretensioner
seat belt helps to reduce ...
Ignition Coil Specification
Item
Specification
Primary Coil Resistance (Ω)
0.62 ± 10％ [20°C (68°F)]
Secondary Coil Resistance (kΩ)
7.0 ± 15％ [20 ...
Copyright © www.ksmanual.com 2014-2024