Kia Sorento: Hood Adjustment
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body (Interior and Exterior) / Exterior / Hood Adjustment
Adjust Hood
| 1. |
After loosening the hinge (A) mounting bolt, adjust the hood (B)
by moving it up or down, or right or left.
|
| 2. |
Adjust the hood height by turning the hood overslam bumpers (C).
|
| 3. |
After loosening the hood latch (D) mounting bolts, adjust the
latch by moving it up or down, or right or left.
|
Hood Replacement
Hood Assembly Replacement
•
When removing and installing the hood, an assistant is
...
Tail Gate Replacement
Tailgate Trim Replacement
1.
Using a screwdriver or remover, remove the upper trim (B).
2.
After loosening the mounting screws, then remove ...
See also:
Component Location
1. Hood switch
2. Burglar horn
3. IPM & RF receiver
4. Key warning switch
5. Front door switch
6. Front door lock actuator & switch
7. Rear door lock actuator ...
Cylinder Head Cover Components
1. Cylinder head cover
2. Gasket
...
Adjustment
After replacing ETC module or ECM, the ETC adaptive value must be reset
/ relearned according to the following procedure.
1.
Check DTC(s) and clear if exist.
...
Copyright В© www.ksmanual.com 2014-2024