Kia Sorento: Heated Steering wheel Inpection

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Steering System / Steering wheel / Heated Steering wheel Inpection

1.

Measure a resistance of NTC and Heated pad.

A.	NTC resistance(Black / Yellow, Black) - 10.0 kΩ ± 10% (25°C)

B.	Heated pad resistance (Yellow, Black) - 1.6 ~ 2.0 Ω ± 10%

2.

Measure a temperature.

A.	The temperature of wheel surface grip must rise from -20°C to 20°C within 6 minute

B.	The temperature of wheel surface grip must keep 38°C ± 4°C after 25 minute

C.	At that time switch on, all measure point (1~8)

Heated Steering wheel System Circuit Diagram

Terminal Function Housing Pin Function Wire color Pad A GND Back B HEATER Yellow C ...

Flex Steering Components Location

1. Flex steering switch ...

See also:

Steering Column and Shaft Removal
1. Disconnect the battery negative cable from the battery and then wait for at least 30 seconds. 2. Turn the steering wheel so that the fro ...

Front Hub / Knuckle / Tone Wheel Components
1. Knuckle 2. Dust cover 3. Hub assembly 4. Brake disc ...

Inspection
Check it by the procedure below to see if the function of the ECM is normal. 1. Turn the ignition key to the "ON" position. 2. Cov ...

Categories

Copyright © www.ksmanual.com 2014-2024