Kia Sorento: Head Lamps Installation

Head Lamps Removal

   Head lamps become very hot during use; do not touch them or any attaching hardware immediately after they have been turn ...

Head Lamps Replacement

Bulb (HID) 1. Turn the head lamp switch off. 2. Disconnect the power connector from the lamp. 3. Remove the ...

See also:

Rear Disc Brake Removal
1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

Auto Head lamp leveling Unit Inspection with GDS
Initialization and diagnosis sequence by using GDS equipment. Below content summarize the procedure for A/S using GDS. No. Procedure 1 Locate vehicle to flat ...

SRS Control Module (SRSCM) Description
The primary purpose of the SRSCM (Supplemental Restraints System Control Module) is to discriminate between an event that warrants restraint system deployment and an event that does not. The ...