1. |
It will be able to diagnose defects of IPM with GDS quickly. GDS
can operates actuator forcefully, input/output value monitoring and
self diagnosis.
|
2. |
Select "Current data", if you will check current data of hazard
switch.
|
3. |
If you will check the hazard switch operation forcefully, select
"Actuation test".
|
SRS Control Module (SRSCM) Removal
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes before beginning ...
Flex Steering Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver airbag module.
(Refer to Restraint - "Driver Airbag (DAB) Mod ...
Water pump Removal and Installation
1.
Loosen the drain plug, and then drain the engine coolant.
Remove the radiator cap to help drain the coolant faster.
2.
Remove the dr ...