Kia Sorento: General
| 1. |
Basically, all measurements in this manual are taken with a tracking
gauge.
|
| 2. |
When a measuring tape is used, check to be sure there is no elongation,
twisting or bending.
|
| 3. |
For measuring dimensions, both projected dimension and actual-measurement
dimension are used in this manual.
|
Body Dimensions
...
Measurement Method
Projected Dimensions
1.
These are the dimensions measured when the measurement points
are projected into the reference plane, and are the reference dimensions ...
See also:
Power Tailgate Latch Removal
1.
Disconnect the negative (-) battery terminal.
2.
After loosening the mounting screws, then remove the tailgate
trim (A).
(Refer ...
Front Driveshaft Components
1. Front driveshaft (LH)
2. Inner shaft bearing bracket
3. Front driveshaft (RH)
[LH]
1. BJ assembly
2. Clip
3. BJ boot band
4. BJ bo ...
Specifications
Smart Key Unit
Items
Specification
Rated voltage
DC 12V
Operating voltage
DC 9 ~ 16V
Operating temperature
-22°F ~ 167°F ...
Copyright © www.ksmanual.com 2014-2024