1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
2. |
Lift the vehicle.
|
3. |
Disconnect the canister close valve connector (A).
|
4. |
Disconnect the ventilation tube quick-connector (B) from the fuel
tank air filter and canister close valve.
|
5. |
Disconnect the vapor tube quick-connector (A).
|
6. |
Remove the canister assembly bracket (D) after removing the mounting
bolts (B) and nut (C).
|
7. |
Remove the canister braket (B) installation bolt (A).
|
8. |
Remove the fuel tank air filter & canister close valve assembly
(A) after rotating it in the direction of the arrow in the figure.
|
9. |
Release the lever (A), and then separate the canister close valve
(B) from the fuel tank air filter (C) after rotating it in the direction
of the arrow in the figure.
|
Checking the parking brake
Type A
Check whether the stroke is within specification when the parking brake pedal
is depressed with 66 lb, 294 N (30 kg) of force. Also, the parking brake alone should
securely hold the vehicl ...
Front Driveshaft Components
1. Front driveshaft (LH)
2. Inner shaft bearing bracket
3. Front driveshaft (RH)
[LH]
1. BJ assembly
2. Clip
3. BJ boot band
4. BJ bo ...