1. |
Turn the ignition switch OFF, and then remove battery (-) cable.
|
2. |
Remove the fuel pump assembly.
|
3. |
Check motor operation by fuel pump connector (A) connecting power
(No.4) and ground (No.5).
|
1. |
Turn the ignition switch OFF, and then remove battery (-) cable.
|
2. |
Remove the fuel pump assembly.
|
3. |
Using an ohmmeter, measure the resistance between terminals 1
and 3 of sender connector (A) at each float level.
|
4. |
Also check that the resistance changes smoothly when the float
is moved from "E" to "F".
|
Component Location
1. Driver power window main switch
2. Passenger window switch
3. IPM (Intalligent intergrated Platform Module)
4. Door lock switch
5. Tailgate lock actuator & switch
...
Specification
...
Antenna Installation
1.
Connect the roof antenna cables and connectors.
2.
Install the rear roof trim.
...