1. |
Turn the ignition switch OFF, and then remove battery (-) cable.
|
2. |
Release the residual pressure in fuel line.
(Refer to the Fuel Delivery System - Repair Procedures - "Release
Residual Pressure in Fuel Line")
|
3. |
Disconnect the low pressure fuel quick-connector (A).
|
4. |
Disconnect the vapor hose (A) which is connected from the PCSV.
|
5. |
Lift the vehicle.
|
6. |
Remove the fuel tank.
(Refer to Fuel Delivery System - " Fuel Tank")
|
7. |
Disconnect the vapor tube quick-connector (A).
|
8. |
Open the vapor tube and low fuel line fixing clip to using driver.
|
9. |
Release the under cover (A) after remove the mounting bolts.
|
10. |
Disconnect the fuel & brake line protect (A) from the fixing clip.
|
11. |
Disconnect the fuel line fixing bracket (A) to engine room low.
|
12. |
Remove the fuel line.
|
Front Strut Assembly Components
1. Strut assembly
2. Insulator
3. Bearing
4. Spring upper pad
5. Spring
6. Dust cover
7. Spring lower pad
...
Front Wiper Motor Component Location
1. Cap
2. Nut
3. Wiper arm & blade
4. Retainer
5. Cowl top cover
6. Bolt
7. Wiper motor & linkage assembly
8. Wiper motor connector
...
Fuel Tank Installation
1.
Install in the reverse order of removal.
Fuel tank band installation
bolt:
44.1 ~ 58.8 N.m (4.5 ~ 6.0 kgf.m, 32.6 ~ 43.4 lb-ft)
...