1. |
Remove the fuel pump.
(Refer to Fuel Delivery System - “Fuel Pump”)
|
2. |
Disconnect the fuel sender connector (A).
|
3. |
Release the fixing hooks, and then remove the fuel sender (A).
|
4. |
Release the fixing hooks (A), and then fuel filter & motor assembly
from reservoir cup.
|
Receiver-Drier Replacement
1.
Remove the condenser.
2.
Remove the cap (B) on the bottom of the condenser with a L wrench
(A).
Tight ...
[CVVT System Mode]
(1) Low Speed / Low Load
(2) Part Load
(3) Low Speed / High Load
(4) High Speed / High Load
...
Automatic reversal
'
During power opening and closing if the power tailgate is blocked by an object
or part of the body, the power tailgate will detect the resistance.
If the resistance is detected while openi ...