1. |
Remove the fuel filler cover (A) after loosening screws (2EA).
|
2. |
Remove the fuel filler door module (A).
|
3. |
Remove the rear 3rd seats.
(Refer to Body - "Rear seats")
|
4. |
Remove the luggage side trim.
(Refer to Body - "Interior trim")
|
5. |
Disconnect the fuel filler door release actuator connector (A).
|
6. |
Check for continuity between terminal No. 1 and No. 2. If there
is no continuity, replace the fuel filler door release actuator (A).
|
Power Door Mirror Switch Removal
Driver Door Mirror Switch
1.
Disconnect the negative battery terminal.
2.
Remove the front door trim.
(Refer to Body - "Front d ...
Rear Hub - Carrier Inspection
1.
Check the hub for cracks and the splines for wear.
2.
Check the rear axle carrier for cracks.
...
Power Tailgate Latch Installation
1.
Install the power tailgate latch & PCU assembly.
2.
Install the tailgate trim.
3.
Connect the negative ( ...