1. |
Check the strut insulator for wear or damage.
|
2. |
Check rubber parts for damage or deterioration.
|
3. |
Compress and extend the piston rod (A) and check that there is
no abnormal resistance or unusual sound during operation.
|
1. |
Fully extend the piston rod.
|
2. |
Drill a hole on the A section to remove gas from the cylinder.
|
Explanation of scheduled maintenance items
Engine oil and filter
The engine oil and filter should be changed at the intervals specified in the
maintenance schedule. If the vehicle is being driven in severe conditions, more
frequent oil and ...
Checking the washer fluid level
The reservoir is translucent so that you can check the level with a quick visual
inspection.
Check the fluid level in the washer fluid reservoir and add fluid if necessary.
Plain water may be use ...
Relay Box (Engine Compartment) Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Pull out the relay from the engine compartment relay box.
Power Relay (Type A)
...