1. |
Remove the dust cover(A).
|
2. |
Using the special tool (09546-26000), compress the coil spring
(A).
|
3. |
Remove the self-locking nut (C) from the strut assembly(B).
|
4. |
Remove the insulator, spring seat, coil spring and dust cover
from the strut assembly.
|
A/C Pressure Transducer Inspection
1.
Measure the pressure of high pressure line by measuring voltage
output between terminal “1” and “2”.
2.
Inspect the volt ...
User Settings Mode
Description
On this mode, you can change setting of the doors, lamps, and so on.
Door
Auto Door Lock (if equipped)
• Off:
The auto door lock operation will be deactivated.
• Speed: ...
Power Tailgate Latch Removal
1.
Disconnect the negative (-) battery terminal.
2.
After loosening the mounting screws, then remove the tailgate
trim (A).
(Refer ...