Kia Sorento: Front Impact Sensor (FIS) Removal

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Restraint / SRSCM / Front Impact Sensor (FIS) Removal

•	Removal of the airbag must be performed according to the precautions/ procedures described previously.

•	Before disconnecting the front impact sensor connector, disconnect the front airbag connector(s).

•	Do not turn the ignition switch ON and do not connect the battery cable while replacing the front impact sensor.

1.	Disconnect the battery negative cable, and wait for at least three minutes before beginning work.

2.	Disconnect the front impact sensor connector (A).

3.	Remove the front impact sensor mounting bolt (B).

Front Impact Sensor (FIS) Components

...

Front Impact Sensor (FIS) Installation

• Do not turn the ignition switch ON and do not contact the battery cable while replac ...

See also:

Brake Pedal Components
1. Cowl bracket 2. Brake pedal member assembly 3. Stop lamp switch 4. Brake pedal arm 5. Brake pedal pad ...

Seatback pocket
The seatback pocket is provided on the back of the front passenger’s and driver’s seatbacks. WARNING - Seatback pockets Do not put heavy or sharp objects in the seatback pockets. In an accide ...

Vehicle weight glossary
This section will guide you in the proper loading of your vehicle and/or trailer, to keep your loaded vehicle weight within its design rating capability, with or without a trailer. Properly loading ...

Categories

Copyright © www.ksmanual.com 2014-2024