1. |
Remove the front wheel and tire (A) from front hub .
|
2. |
Remove the brake caliper mounting bolts, and then place the brake
caliper assembly (A) with wire.
|
3. |
Remove the coking nut (A).
|
4. |
Remove the brake hose (A) and wheel speed sensor (B).
|
5. |
Remove the tie rod end ball joint (C) from the knuckle.
|
6. |
Disconnect the ball joint(A) from knuckle using the special tool
(09568-4A000).
|
7. |
Remove the lower arm (A) mounting bolt and nut from the knuckle.
|
8. |
Loosen the strut mounting bolts(A) and then remove the hub and
knuckle assembly from the strut assembly (B).
|
9. |
Install in the reverse order of removal.
|
Schematic Diagrams
MDPS Circuit Diagram
Harness Connector
Connector
Pin no
Pin name
Battery
1
Battery +
2
Battery -
Vehicl ...
Passenger Airbag (PAB) Module Removal
1.
Disconnect the battery negative cable and wait for at least thirty
seconds before beginning work.
2.
Remove the glove box housing.
...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the IATS connector.
3.
Measure resistance between the IATS termi ...