1. |
With the fog lamp switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified,
replace the multifunction switch.
|
Flex Steering Inspection
1.
Check the audio flex streeing switch (A) for resistance between
terminals in each switch position.
Switch
Resistance (В±5%)
...
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the CVVT oil control valve connector (A).
...
Console Components
[M/T]
1. Floor console assembly
2. Console upper cover
3. Console side cover [LH]
4. Console side cover [RH]
5. Rear console cover
6. Floor console mounting ...