1. |
Installation is the reverse of removal.
|
2. |
Compress the piston into the caliper body using the SST (09581-11000).
|
3. |
After installation, bleed the brake system.
(Refer to Brake system - "Brake system Bleeding")
|
Auto Defogging Actuator Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the cowl side trim.
(Refer to Body - "Crash Pad")
...
Operation and Leakage Check
Check all of the following items:
Component
Procedure
Brake Booster (A)
Check brake operation by applying the brakes during a test drive.
If the brakes do not ...
Measurement Method
Projected Dimensions
1.
These are the dimensions measured when the measurement points
are projected into the reference plane, and are the reference dimensions ...