Kia Sorento: Front Bumper Replacement
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body (Interior and Exterior) / Bumper / Front Bumper Replacement
|
| 1. |
Loosen the radiator upper cover mounting bolts and clips.
|
| 2. |
Loosen the front bumper lower mounting clips.
|
| 3. |
After loosening the front bumper side's mounting screw, then disconnect
the side's.
|
| 4. |
Disconnect the fog lamp connector (A).
[LH]
[RH]
|
| 5. |
Remove the front bumper cover (A).
|
| 6. |
Install in the reverse order of removal.
|
Front Bumper Components
1. Front bumper cover
2. Front bumper lower stiffner
3. Front bumper upper stiffner
4. Front bumper side bracket
...
Rear Bumper Components
1. Rear bumper cover
2. Rear bumper lower bracket [RH]
3. Rear bumper lower bracket [LH]
4. Rear bumper side bracket [RH]
5. Rear bumper side bracket [LH]
...
See also:
Using a child restraint system
For small children and babies, the use of a child seat or infant seat is required.
The child seat or infant seat should be of appropriate size for the child and should
be installed in accordance w ...
Passenger Airbag (PAB) Module Description
Passenger Airbag (PAB) module is located in the passenger crash pad. This
PAB contains 2 firing squibs of airbag and 1 firing squib of active vent. Depending
of crash speed or the tightening ...
Front Wheel Transfer Assembly Components Location
1. Under cover
2. Transaxle Assembly
3. Transfer assembly
4. Propeller shaft
5. Coupling assembly
1. Under cover
2. Transaxle Assembly
3 ...
Copyright © www.ksmanual.com 2014-2024