Kia Sorento: Front Body E
| * These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ] |
|
|
|
|
| Hood hinge mounting hole (Ø11) |
Fender apron upper panel corner |
Fender apron upper panel tooling hole (7X12) |
|
|
|
|
| Fender panel mounting hole (Ø9) |
Front shock absorber mounting hole (Ø13) |
Cowl panel tooling hole (Ø6.6) |
|
|
|
|
| Front pillar outer corner |
Front pillar outer corner |
Engine mounting bracket hole (Ø13) |
|
|
|
|
| Transaxle mounting hole (Ø15) |
Engine mounting bracket hole (Ø13) |
Transaxle mounting hole (Ø15) |
|
|
|
|
| Front side member tooling hole (Ø11) |
Front side member tooling hole (Ø11) |
Front end module mounting hole (Ø13) |
|
|
||
| Front end module mounting hole (Ø9) |
Front Body D
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ]
...
Side Body A
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ]
...
See also:
Purge Control Solenoid Valve (PCSV)
Purge Control Solenoid Valve (PCSV) is installed on the surge tank and
controls the passage between the canister and the intake manifold. It is a solenoid
valve and is open when the ECM groun ...
Installation
1.
Install in the reverse order of removal.
•
...
Power brakes
Your vehicle has power-assisted brakes that adjust automatically through normal
usage.
In the event that the power-assisted brakes lose power because of a stalled engine
or some other reason, you c ...
Copyright В© www.ksmanual.com 2014-2024