1. |
Lift the vehicle.
|
2. |
Disconnect the fuel filler hose (A).
|
3. |
Disconnect the ventilation tube quick-connector ( B).
|
4. |
Open the fuel filler door and unfasten the filler-neck assembly
mounting screw (A).
|
5. |
Remove the rear-LH wheel, tire and the inner wheel house.
|
6. |
Remove the filler-neck assembly from the vehicle after removing
the bracket mounting nut (A).
|
Steering Gear box Removal
1.
Remove the front wheel and tire (A) from front hub.
Tightening torque :
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
...
LCD Display Control
The LCD display modes can be changed by using the control buttons on the steering
wheel.
[Type A]
(1) :
TRIP button for changing trip modes
(2) :
RESET button for resetting items
...
Troubleshooting
Symption
Suspect area
Remedy
Engine misfire with abnormal internal lower engine noises.
Worn crankshaft bearings
Loose or out of specification engine flywhe ...