Kia Sorento: Fender Replacement - Exterior - Body (Interior and Exterior) - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Fender Replacement

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body (Interior and Exterior) / Exterior / Fender Replacement

  
•
When removing and installing the hood, an assistant is necessary.
•
Be careful not to damage the hood and body.
•
When removing the clips, use a clip remover.
1.
Remove the following parts.
A.
Front Bumper
B.
Head Lamps
(Refer to "Head Lamps" in BE group)
C.
Side Sill Moulding
2.
Loosen the front mud guard mounting clips and screws.

3.
After loosening the mounting clips, then remove the fender side cover (A).

4.
After loosening the mounting bolts, then remove the fender assembly (A).

5.
Install in the reverse order of removal.
Exterior
...

Hood Replacement
Hood Assembly Replacement    • When removing and installing the hood, an assistant is ...

See also:

Front Hub / Knuckle / Tone Wheel Components
1. Knuckle 2. Dust cover 3. Hub assembly 4. Brake disc ...

Opening the tailgate
The tailgate is locked or unlocked when all doors are locked or unlocked with the key, transmitter (or smart key) or central door lock switch. If unlocked, the tailgate can be opened by press ...

Replacement
The injector combustion seal should be replaced new one to prevent leakage after removing the injector. 1. Remove the combustion seal (A) with a wire cutter. ...

Copyright © www.ksmanual.com 2014-2024