Kia Sorento: Fail-Safe Mode
| Item |
Fail-Safe |
|
| ETC Motor |
Throttle valve stuck at 5° |
|
| TPS |
TPS 1 fault |
ECM looks at TPS2 |
| TPS 2 fault |
ECM looks at TPS1 |
|
| TPS 1,2 fault |
Throttle valve stuck at 5° |
|
| APS |
APS 1 fault |
ECM looks at APS 2 |
| APS 2 fault |
ECM looks at APS 1 |
|
| APS 1,2 fault |
Throttle valve stuck at 5° |
|
When throttle value is stuck at 5°, engine speed is limited at
below 1,500rpm and vehicle speed at maximum 40 ~ 50 km/h (25 ~ 31 mph)
|
Specification
[Throttle Position Sensor (TPS)]
Throttle Angle(°)
Output Voltage(V)
TPS1
TPS2
0
0.0
5.0
10
0.48
4.52
...
See also:
Hazard Lamp Switch Installation
1.
Install the heater control unit to the center fascia panel.
2.
Install the center fascia panel.
...
Emergency Fastening Device (EFD) Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the negative (-) cable from battery and wait for at
least thirty seconds.
...
Specifications
Item
Specification
Rated voltage
DC 3V
Temperature range
-4°F ~ 140°F (-20°C ~ +60°C)
RF Modulation method
FSK
...
Copyright © www.ksmanual.com 2014-2024