1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
2. |
Remove the crash pad lower panel.
(Refer the Body - "Crash pad lower panel")
|
3. |
Remove the crash pad side switch assembly (A) after loosening
the screws.
|
4. |
Check the continuity between the switch terminals as the ESC OFF
switch is engaged.
|
Battery Specification
Item
Specification
Model type
CMF68L-BCI
Capacity [20HR/5HR] (AH)
68 / 54
Cold Cranking Amperage (A)
600 (SAE) / 480 (EN)
...
Front Fog Lamps Installation
1.
Install the front fog lamp bulb.
2.
Connect the fog lamp connector.
3.
Install the front tire wheel guard.
...
35R Clutch Control Solenoid Valve(35R/C_VFS)
35R Clutch control solenoid valve(35R/C) is attached to the valve body.
This variable force solenoid valve directly controls the hydraulic pressure
inside the 35R Clutch.
...