1. |
Check the engine oil quality.
Check the oil deterioration, entry of water, discoloring of thinning.
If the quality is visibly poor, replace the oil.
|
2. |
Check the engine oil level.
After engine warm up stop the engine wait 5 minutes then check the oil
level. Oil level should be between the "L" and "F" marks on the dipstick.
If low check for leakage and add oil up to the "F" mark.
|
Selection Of Engine Oil
For best performance and maximum protection of all types of operation,
select only those lubricants which :
|
Tightening Torques
Items
N.m
kgf.m
lb-ft
Compressor
19.6 ~ 33.3
2.0 ~ 3.4
14.5 ~ 24.6
Condenser - Discharge hose
4.9 ~ 7.8
0.5 ~ 0 ...
Smart key unit Inspection
Smart Key Unit
-
Refer to BE group - inspection / self diagnosis with scan tool.
Smart Key Switch
-
Refer to BE group - inspection / self diag ...
Catalytic Converter Removal
1.
Remove the exhaust manifold.
(Refer to Engine Mechanical System - "Exhaust Manifold")
...