Kia Sorento: Engine Electrical System

Muffler Removal and Installation

1. Remove the front muffler (A) after loosening the mounting nuts. Tightening torque: 39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft ...

Specification

Ignition System Ignition Coil Item Specification Primary Coil Resistance (Ω) 0.62 ± 10％ [20°C (68°F)] Secondary Coil Re ...

See also:

TPMS Sensor Description
1. Mode (1) Configuration State A. All sensors should be in the Low Line state. ...

Cooling Fan Description
Control the cooling motor voltage in according to the duty(300Hz) of ECM. [ECU → PWM Input Signal(SI : 300Hz)] Signal Input Duty (%) Motor Voltage (V) 10 ...

Description
Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog signal propo ...