Kia Sorento: Emergency Fastening Device (EFD) Removal
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Restraint / Seat Belt Pretensioner / Emergency Fastening Device (EFD) Removal
| 1. |
Disconnect the battery negative cable, and wait for at least thirty
seconds before beginning work.
|
| 2. |
Remove the EFD cover pad (A).
|
| 3. |
Remove the seat belt after pushing the lock pin with a fiat-tip
screwdriver (B).
|
| 4. |
Remove the door scuff trim. (Refer to the Body group- Interior
trim)
|
| 5. |
Remove the center pillar trim. (Refer to the Body group- Interior
trim)
|
| 6. |
Disconnect the EFD connector (A).
|
| 7. |
Loosen the EFD mounting bolt (B) and remove the EFD.
|
Emergency Fastening Device (EFD) Description
Emergency Fastening Device (EFD) operates as well as Belt Pretensioner
at the same time If it gets into its deploy condition after a collision. It
is located at near anchor on driver and pass ...
Emergency Fastening Device (EFD) Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the negative (-) cable from battery and wait for at
least thirty seconds.
...
See also:
Fuel Filter Installation
1.
Install in the reverse order of removal.
...
Instrument cluster
1. Tachometer
2. Speedometer
3. Engine coolant temperature gauge
4. Fuel gauge
5. LCD display
6.Warning and indicator lights (if equipped)
7. Turn signal indicator lights
Instrument Cluster ...
Direct Electro Hydraulic Actuator Coupling Removal
Coupling Maintenance Precautions
Maintain the coupling at a horizontal level.
•
...
Copyright В© www.ksmanual.com 2014-2024