1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the negative (-) cable from battery and wait for at
least thirty seconds.
|
3. |
Install the EFD with a bolt (B).
|
4. |
Connect the EFD connector (A).
|
5. |
Install the center pillar trim. (Refer to the Body group- Interior
trim)
|
6. |
Install the door scuff trim. (Refer to the Body group- Interior
trim)
|
7. |
Insert the seat belt to the anchor pretensioner.
|
8. |
Attaches EFD cover pad (A) on EFD.
|
9. |
Reconnect the battery negative cable.
|
10. |
After installing the EFD, confirm proper system operation:
|
Spark Plug Removal
1.
Remove the ignition coil.
(Refer to Ignition System - "Ignition Coil")
2.
Using a spark plug wrench, remove the spark plu ...
Components
1. Cooling fan
2. Radiator upper hose
3. Radiator lower hose
4. Radiator
5. Condenser
6. Side air guard
7. Over flow hose
8. Reservior tank
9. Radiator cap
...
Front Hub / Knuckle / Tone Wheel Removal and Installation
1.
Remove the front wheel and tire (A) from front hub .
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
...