1. |
Set the front tires straight-ahead before removing the steering
wheel.
|
2. |
Disconnect the battery negative cable.
|
3. |
Release the connector locking pin, then disconnect the driver
airbag module connector(B).
|
4. |
Remove the steering wheel and steering wheel column shroud. (Refer
to the Steering System group- Steering Column and Shaft)
|
5. |
Disconnect the clock spring and horn connector, then remove the
clock spring.
|
4WD ECU Description
4WD ECU processes signals from various sensors and determines the current
road and driving conditions. The ECU then utilizes this information to implement
precision control over the 4WD coupl ...
Body Panel Gaps
...
Specifications
Direct control VFS[OD/C]
▷ Control type : Normal high type
Control Pressure kpa
(kgf/cm², psi)
539.370 ~ 0 ( 5.5 ~ 0, 78.23 ~ 0)
Current value(mA)
...