Kia Sorento: Direct Electro Hydraulic Actuator Coupling Installation
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / 4 Wheel Drive (4WD) System / Coupling Assembly / Direct Electro Hydraulic Actuator Coupling Installation
| 1. |
Install in the reverse order of removal.
|
| 2. |
After replacing the coupling, reset the 4WD ECU's clutch learing
using the GDS tool.
(Refer to 4WD Control System - "Repair procedures")
|
Direct Electro Hydraulic Actuator Coupling Removal
Coupling Maintenance Precautions
Maintain the coupling at a horizontal level.
•
...
Oil hydraulic Motor(Actuator) Description
The 4WD ECM controls the Pump Motor Pump (Actuator) to generating an oil
pressure. The pressure engages a multiple disk clutch to transfer torque to
the rear wheels. The torque to the rear wh ...
See also:
Driver's and passenger's front air bag
Your vehicle is equipped with an Advanced Supplemental Restraint (Air Bag) System
and lap/shoulder belts at both the driver and passenger seating position.
The indication of the system's prese ...
Muffler Components
1. Front muffler
2. Catalytic converter
3. Center muffler
4. Main muffler
5. Gasket
6. Hanger
...
Engine Room Under Cover Removal and Installation
1.
Unfasten the fasteners and bolts and then remove the engine room under
cover (A).
Tightening torque:
7.8 ~ 11.7 N.m (0.8 ~ 1.2 kgf ...
Copyright © www.ksmanual.com 2014-2024