Kia Sorento: Diagnosis With GDS
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Blind Spot Detection System / Diagnosis With GDS
| 1. |
BSD system defects can be quickly diagnosed with the GDS. GDS
operates actuator quickly to monitor, input/output value and self diagnosis.
|
| 2. |
Connect the cable of GDS to the data link connector in driver
side crash pad lower panel, turn the power on GDS.
|
| 3. |
Select the vehicle model and then BSD system.
|
| 4. |
Select "Input/output monitoring", if you want to check current
data of BSD system.
|
| 5. |
If you want to check each module operation forcefully, select
"Actuation test".
|
Description
BSD is a system that uses two magnetic wave radar sensors attached on
the rear bumper to measure the distance from the following vehicles and provides
the sensing and (visual and auditory) al ...
See also:
Component Location
1. Automatic transaxle
2. Inhibitor switch
3. Transaxle Control Module (TCM)
4. Valve body cover
5. Solenoid valve connect
6. Oil temperature sensor
7. Valve body assemb ...
Side repeater lamp replacement
If the light bulb does not operate, we recommend that you check with an authorized
Kia dealer.
Rear combination lamp bulb replacement
(1) Stop and tail light
(2) Tail light
(3) Rear turn sign ...
Copyright В© www.ksmanual.com 2014-2024