Trouble factor |
Check item |
Trouble symtom |
Explanation |
Note |
Drop, impact, and overload |
Motor |
Abnormal noise |
- Visable or unvisable damage can occur.The steering wheel could
pull to one side by using the dropped parts.- Precise parts of motor/ECU
are sensitive to vibration and impact.- Overload can cause unexpected damage |
- Do not use the impacted EPS.- Do not overload each parts. |
ECU |
Circuit damage- Wrong welding point- Broken PCB- Damaged precise
parts |
|||
Torque sensor |
Insufficient steering effort |
Overload to INPUT shaft can cause malfunction of the torque
sensor |
- Do not impact the connecting parts (When inserting and torquing)-
Use the specified tool to remove the steering wheel. (Do not hammer on it)-
Do not use the impacted EPS |
|
Shaft |
Insufficient steering effort (Uneven between LH and RH) |
|
Do not use the impacted EPS |
|
Pull/Dent |
Harness |
- Malfunction-impossible power operation- Malfunction of EPS |
Disconnection between harness connecting portion and harness |
Do not overload the harness |
Abnormal storage temperature |
Motor/ECU |
Abnormal steering effort by improper operation of the motor/ECU |
- Waterproof at the normal condition- Even a little moisture
can cause malfunction of the precise parts of the motor/ECU |
- Keep the normal temperature and proper moisture, while storaging-
Avoid drowning |
Rear combination lamp Installation
1.
Install the tailgate combination lamp assembly after replacing
the bulb.
2.
Install the lamp cover to the tailgate after connecting the ...
Cylinder Head Cover Installation
1.
Install cylinder head cover.
(1)
The hardened liquid gasket sealant located on the upper area
between timing chain cover and cyli ...
Air bag
(1) Driver’s front air bag
(2) Passenger’s front air bag
(3) Side air bag
(4) Curtain air bag
WARNING
Even in vehicles with air bags, you and your passengers must always wear the
safety be ...