Kia Sorento: Description
Crankshaft Position Sensor (CKPS) detects the crankshaft position and
is one of the most important sensors of the engine control system. If there
is no CKPS signal input, the engine may stop because of CKPS signal missing.
This sensor is installed on the cylinder block or the transaxle housing and
generates alternating current by magnetic flux field which is made by the sensor
and the target wheel when engine runs.
The target wheel consists of 58 slots and 2 missing slots on 360 degrees
CA (Crank Angle).
Wave Form
...
See also:
Removal
1.
Remove the air duct.
(Refer to Engine Mechanical System - "Air cleaner")
2.
Remove the battery and the battery tray.
...
Engine And Transmission Assembly Installation
Install the other parts in reverse order of removal.
Perform the following :
•
Adjust a shift cable.
•
Refill engine with engine oil.
...
Component Location (1)
1. Smart key unit
2. Interior antenna 3
3. Interior antenna 2
4. Interior antenna 1
5. Buzzer
...
Copyright © www.ksmanual.com 2014-2024