|
Mark all wiring and hoses to avoid misconnection.
|
In case of removing the high pressure fuel pump, high pressure fuel
pipe, delivery pipe, and injector, there may be injury caused by leakage
of the high pressure fuel. So don’t do any repair work right after engine
stops.
|
1. |
Remove the intake manifold.
(Refer to Intake And Exhaust System - "Intake Manifold")
|
2. |
Remove the exhaust manifold.
(Refer to Intake And Exhaust System - "Exhaust Manifold")
|
3. |
Remove the cylinder head cover.
(Refer to Cylinder Head Assembly - "Cylinder Head Cover")
|
4. |
Remove the high pressure fuel pump bracket(A).
|
5. |
Remove the timming chain cover.
(Refer to Timing System - "Timing Chain Cover")
|
6. |
Remove the timming chain.
(Refer to Timing System - "Timing Chain")
|
7. |
Remove the cmashaft.
|
8. |
Remove the intake OCV (Oil control valve) (A) using a torx wrench.
|
9. |
Remove the exhaust OCV (Oil control valve) (A) using a torx wrench.
|
10. |
Remove the intake CMPS (Camshaft position sensor) (A).
|
11. |
Remove the exhaust CMPS (Camshaft position sensor) (A) after removing
the engine hanger (B).
|
12. |
Remove the injector & rail module (A).
|
13. |
Remove the cylinder head.
|
Inspection
1.
Turn the ignition switch OFF.
2.
Remove the ECTS (Refer to "Removal").
3.
After immersing the ther ...
Front Hub / Knuckle / Tone Wheel Removal and Installation
1.
Remove the front wheel and tire (A) from front hub .
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
...
Explanation of scheduled maintenance items
Engine oil and filter
The engine oil and filter should be changed at the intervals specified in the
maintenance schedule. If the vehicle is being driven in severe conditions, more
frequent oil and ...