Kia Sorento: Cylinder Block Reassembly
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Engine Mechanical System / Cylinder Block / Cylinder Block Reassembly
| 1. |
Install the oil jet (A).
|
| 2. |
Install the crankshaft.
(Refer to Cylinder Block - "Crankshaft")
|
| 3. |
Install the piston & connecting rod assembly.
(Refer to Cylinder Block - "Piston And Connecting Rod")
|
| 4. |
Install the ladder frame.
(Refer to Cylinder Block - "Ladder Frame")
|
Cylinder Block Inspection
1.
Remove gasket material.
Using a gasket scraper, remove all the gasket material from the top
surface of the cylinder block.
2.
Cl ...
Piston and Connecting Rod Components
1. Piston ring
2. Snap ring
3. Piston
4. Connecting rod
5. Connecting rod upper bearing
6. Connecting rod lower bearing
7. Connecting rod bearing cap
...
See also:
Rear Seat Belt Replacement
Second Row Seat Belt Replacement
•
When installing the belt, make sure not to damaged the ...
CVVT & Camshaft Installation
1.
Install the intakeCVVT assembly(A), exhaust CVVT assembly(B) and camshaft(C).
Tightening torque :
53.9 ~ 63.7 N.m (5.5 ~ 6.5 kgf.m, 39 ...
Rear Differential Carrier Component
1. Rear Differential Carrier
2. Coupling Assembly
...
Copyright В© www.ksmanual.com 2014-2024